|
Home
FIREPLACES:
Special
Offers
Limestone
Fireplaces
Modern
Fireplaces
Period
& Traditional
Brick
Fireplaces
Timber
Surrounds
FIRES:
Gas
Fires
Electric
Fires
Real
Fires
STOVES:
Inset
Stoves
Multi
fuel Stoves
Wood
Burning Stoves
Smoke
Control Stoves
Gas
Stoves
Electric
Stoves
FITTING:
Fitting
Services
ABOUT
US:
Great
Day Out
Careers
Products
About
Us
Links
CONTACT:
Map
Contact
us
|
Inset
Stoves from
Esse can trace its ancestry
all the way back to 1854.Now as then they represent the very best
in stove design and capability.The knowledge acquired over 150 years
is used daily and it is there on going quest to develop new exiting
products.
Their factory on the edge
of the Yorkshire dales is steeped in the stove building history
and it is at the Ouzledale foundry where the Esse stove is born.
They have an on site museum that bears testament to their unrivalled
heritage
Convector
stoves were pioneered by ESSE back in the 1920's and they have big
advantages. The firebox sits inside a second outer casing with a
cavity in between the two. Cool air from the room is drawn in at
the base of the stove and heated before rising out of the top of
the stove into the room. This process also means that the outer
surface of the stove, while still very hot, is much less likely
to burn than an ordinary stove. Non convection stoves heat by radiation
which only travels in straight lines, but ESSE convector stoves
emit a continuous gentle stream of hot air which can evenly heat
every nook and cranny of a room.
THE
ESSE 301 INSET
|
See the Stainless steel version in store
|
ESSE
300 series inset convector stoves provide a unique solution
to convert an inefficient open fire into an economical multi-fuel
stove, improving the efficiency of an open fire by up to
400%.
The 301 offers the best of both worlds. It fits straight
into a standard fireplace but boasts a 5kW/h output. It
is also equipped with a secondary air control for burning
wood and smokeless fuel.
Overall
Measurements:
H
x 23.5" (595mm)
W
x 19.25" (485mm)
D
x 6" (155mm)
Opening
Requirements:
H
x 21.25 - 22"(540-560mm)
W x 15.75" - 16.5" (396-420mm)
D x 7.75" (195mm)
ADDITOINAL
DOOR OPTIONS
|
|
Stainless Steel Door |
Black Door |
|
Back
to top
THE
ESSE 350 INSET
|
|
The
award winning 350 offers a larger output of
up to 7kW/h. Like the 301 it fits into a
standard fireplace, however, the brick fire back
must be removed to allow for its larger
capacity
firebox. It is equipped with a secondary air control
for burning wood and smokeless fuel.
Overall
Measurements:
H
x 24.25" (614mm)
W
x 19.25" (485mm)
D
x 7.75" (190mm)
Opening
Requirements:
H
x 21.25 - 22"(540-560mm)
W x 15.75" - 16.5" (396-420mm)
D x 10.25" (260mm)
ADDITOINAL
DOOR OPTIONS
|
 |
Diamond Cast Door |
Black Door |
|
Back
to top
|
All
Rights Reserved | © Chiswell Fireplaces Ltd.